 
   
    
|
Cooling Tower Manufacturers and Suppliers in India
|
|
|
|
FRP Cooling Towers are
manufactured with Glass reinforced plastic mostly in wind with standing
bottle type and square type models. It is a mechanical type Counter
Flow Tower. FRP Cooling tower intakes the air from
bottom and discharge the waste heat at the top. Since the water is
traveling from top and the air passes from bottom to top, the water
droplet have more direct contact time with air. The wet cooling Towers
are cooled with the help of evaporating some proportionate quantity of
cirulating water.
The
bottle type tower casing is filled with Honeycomb type PVC FILLS. The
rotating water distributor sprinkler is fixed in the top of the inlet
pipeline and the same distributes the hot water evenly over the
Honeycomb Fill media. The sprinkler will be operated with
self-propulsion system. The PVC Fills is corrugated with channels
between each flutes to prevent the blockage and giving more and large
surface area per unit volume. The cold air meets the cold water at the
bottom of the infill providing maximum evaporation and heat transfer in
the infill.
Finally FRP Cooling Towers are
more compact, light in weight, least power consumption, long-lasting,
Durable and lowest maintenance expenditure. Since Hot dip galvanized
structural and stainless steel fasteners are used, FRP Towers are
corrosion Free.
Adjustable
pitch, Aluminium [LM-6] or FRP Fan Blades are directly mounted on the
Electric motor [IP 55, with Stainless steel shaft, TEFC Special type
cooling tower motor] to avoid excess power consumption and unnecessary
gear driven problems. All moving parts can be easily approached from
top. So easy maintenance is possible. Smaller capacities are factory
assembled and just bolting at site is enough. However higher capacities
are assembled into the site only to avoid excess transportation cost.
Our range includes 5 to 600 TR in single cell and multiple cells are
used for further capacities. |
| PRODUCT IMAGES |
| |
| SPARES |
| |
we are cooling tower manufacturers and heat exchanger manufacturers specialized in cooling towers such as dry cooling towers, Timber Cooling Tower,
cooling tower manufacturers, wooden cooling tower, cross flow cooling tower, FRP cooling tower, Bootle shaped cooling tower, rcc cooling tower, fanless cooling tower, dry cooling tower, Timber Cooling Towers,
cooling tower manufacturer, wooden cooling towers, cross flow cooling towers, FRP cooling towers, Bootle shaped cooling towers, rcc cooling towers, fanless cooling towers and heat exchangers such as air cooled heat exchanger, shell and tube heat exchanger, finned tube heat exchanger, plate type heat exchanger, air cooled condenser, air fin cooler, cooling tower spares, heat exchanger spares
| |