Home   |   Company   |   Cooling Tower   |    Heat Exchanger   |    Air Dryer   |    Water Softner   |    Fiber Glass Tank   |    Enquiry   |    Contact

COOLING TOWER DIVISION

Timber Cooling Towers   |   FRP Cooling Towers   |   Dry Cooling Towers   |    Spares   |    Services     
United Cooling Systems [P] Ltd., has its various division of manufacturing includes COOLING TOWER Division. The Cooling Tower division offers three types of Cooling Towers. That is TIMBER, FRP and DRY Cooling Towers.

TIMBER COOLING TOWERS:



Timber Cooling Towers includes most Conventional method [Natural Draft Cooling Towers] and mechanical type, Induced Draft Counter Flow, Cross Flow Cooling Towers.

Natural Type Cooling Towers are nothing but the water is cooled with natural air traveling and the water is sprayed with the help of Spray nozzles and covered with louvers covers. This method saves the operating cost because it has no mechanical fans.

Mechanical Type, Induced Draft Cross flow Cooling Towers are the common timber type Cooling Towers Frequently required by all the major sector customers. The cross flow Cooling Towers are having mechanical Fan and the water is cooled with the help of mechanical Fan motor. It provides better thermal performance, low drift loss suitable for the current water scarced world. These towers are having the highest Delta T and greater efficiency and lower & easy maintenance cost. It has both single side and double side air intake. So depends upon the site condition you can prepare the model of the tower. These towers can be used for which ever quantity of water-cooling by extending the size and lengths by increasing the Standard Size Pressure treated wooden Frames. The woods used for manufacturing the Cooling Towers are completely seasoned chemically treated, lightwood. The Splash bars, Drift Eliminator, Fan duct and complete Structures are made out of the same wood.

FRP   [FIBRE REINFORCED PLASTIC]   COOLING TOWERS
FRP Cooling Towersare manufactured with Glass reinforced plastic mostly in wind with standing bottle type and square type models. It is a mechanical type Counter Flow Tower. FRP Cooling tower intakes the air from bottom and discharge the waste heat at the top. Since the water is traveling from top and the air passes from bottom to top, the water droplet have more direct contact time with air. The wet cooling Towers are cooled with the help of evaporating some proportionate quantity of cirulating water.

The bottle type tower casing is filled with Honeycomb type PVC FILLS. The rotating water distributor sprinkler is fixed in the top of the inlet pipeline and the same distributes the hot water evenly over the Honeycomb Fill media. The sprinkler will be operated with self-propulsion system. The PVC Fills is corrugated with channels between each flutes to prevent the blockage and giving more and large surface area per unit volume. The cold air meets the cold water at the bottom of the infill providing maximum evaporation and heat transfer in the infill.

Finally FRP Cooling Towers are more compact, light in weight, least power consumption, long-lasting, Durable and lowest maintenance expenditure. Since Hot dip galvanized structural and stainless steel fasteners are used, FRP Towers are corrosion Free.

Adjustable pitch, Aluminium [LM-6] or FRP Fan Blades are directly mounted on the Electric motor [IP 55, with Stainless steel shaft, TEFC Special type cooling tower motor] to avoid excess power consumption and unnecessary gear driven problems. All moving parts can be easily approached from top. So easy maintenance is possible. Smaller capacities are factory assembled and just bolting at site is enough. However higher capacities are assembled into the site only to avoid excess transportation cost. Our range includes 5 to 600 TR in single cell and multiple cells are used for further capacities.
DRY COOLING TOWERS


This is one of the latest model Cooling Tower. It is specially designed with copper or aluminium finned tube to increase the heat transfer area and these towers are particularly designed for water scarce areas.

Since Dry Cooling Tower is functioning with Air-cooling Technology, there is no need of excess water evaporation or make up is required to operate the cooling Tower. And also, the Process/Engine water/oil is directly taken from the system to Dry Cooling Tower. So the mid-Heat Exchanger is not required. When comparing with other type Cooling Towers these towers are zero maintenance and long-lasting.

Dry Cooling Towers are nothing but extended type radiator Cooling. The tubes are wounded with integral Aluminium or copper wire / strip type fins for increasing the Heat Transfer areas. In this system the core area [Heat Transfer area] is cooled with a intake cooling Fan at the top with the help of IP 55, TEFC Electric motor in counter flow method to maximize heat transfer efficiency. The hot media [primary] will be circulated inside the tubes and the atmospheric air is used as the secondary media to cool the primary media. Since all the heat Transfer areas can be easily approach, the periodical cleaning and maintenance will be very easy. And also the replacement period is also more when comparing with other cooling Tower systems. Since oil/water is cooled by a single heat Exchanger system, cost energy cooling water and maintenance spent can be reduced, various hot media can be cooled simultaneously by the same fan using sectionalized parts.








SPARES


Sprinkler
Nozzles
Motor
Fan
Splash Bar
Fills
SERVICES
UNDERTAKE ALL REPAIR & SITE DESCALING:

Undertaking site servicing and repairing of Cooling Towers, Boilers, Heat Exchangers, Oil Coolers, Genset water lines and other cooling systems.









Home   |   Company   |   Cooling Tower   |    Heat Exchanger   |    Air Dryer   |    Water Softner   |    Fiber Glass Tank   |    Enquiry   |    Contact